The "Verify your Google Account" screen on Xiaomi/Redmi devices is the Factory Reset Protection (FRP) screen. Auto-activated by MIUI/HyperOS when a phone is wiped with a Google account still signed in, this anti-theft feature works well for securing lost devices. Still, it becomes a major hurdle for owners who forget their linked credentials.
This guide walks through three practical ways to bypass Xiaomi/Redmi FRP, starting with the fastest option and moving toward the more hands-on, technical routes.
Method 1: Use iSunshare Android Password Genius (Fastest, No Technical Skill Needed)
For most people, the quickest and most reliable fix is a dedicated Xiaomi FRP bypass tool. iSunshare Android Password Genius is built specifically to handle this scenario on Xiaomi and Redmi devices, along with several other Android brands.
Step 1: Download and install iSunshare Android Password Genius on a computer, then launch the program.
Step 2: From the main screen, select Unlock Google Lock (FRP).
Step 3: Connect your Xiaomi or Redmi phone to the computer with a USB cable, then choose Mi from the list of supported brands.
Step 4: Check the option: Remove FRP with One Click and hit the Start button.
Step 5: Follow the on-screen prompts to enter MiAssistant mode when asked — the software will guide you through each tap.
Step 6: Sit back while the tool works. The phone will reboot a few times on its own, and once it's done, the Google verification screen will be gone and you can set the device up as new.
The whole process typically takes just a few minutes and doesn't require ADB commands, root access, or any prior technical background.
Method 2: Bypass FRP with ADB Commands
This route works without extra software, but it does require a basic comfort level with command-line tools and a PC. This method is less predictable across different Xiaomi firmware versions and MIUI/HyperOS updates, so if a command sequence doesn't behave as expected, falling back to Method 1 is usually the more reliable path.
Step 1: Download and install the ADB driver package on your Windows computer, then follow the setup prompts.
Step 2: Connect the Xiaomi phone via USB and make sure USB debugging is enabled in Developer Options (if you can reach that menu).
Step 3: Open a command window from the folder where the ADB tools are installed.
Run the FRP-clearing command: adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1.
Step 4: Reboot the device once the commands finish executing.
Method 3: Remove the Google Account Before You Reset
If you still have access to the phone's settings — for example, you're planning ahead before selling or resetting the device — you can avoid FRP altogether by removing the Google account first.
Step 1: Open Settings and go to Accounts & Sync.
Step 2: Tap the Google account listed on the device.
Step 3: Select Remove Account and confirm.
Step 4: Enter your device PIN or password if prompted.
With no Google account attached, a factory reset won't trigger FRP at all. This only works, though, if you can still get into the phone's settings menu — once you're already stuck on the verification screen, you'll need Method 1 or instead.
Troubleshooting Common Issues on Xiaomi FRP Bypass
Computer fails to detect the phone
The most likely cause is a missing USB driver. To fix this, install the official Xiaomi/Mi USB driver on your computer, then reconnect the device.
Phone gets stuck mid-reboot during the bypass process
This issue occurs when the USB connection is interrupted. Reconnect the data cable securely, then restart the entire bypass procedure from the beginning.
MiAssistant screen does not appear
This typically happens because Developer Options was not enabled on the phone beforehand. Relaunch the software and follow its guided prompt again — it will walk you step-by-step through enabling the setting.
FRP verification screen reappears after initial setup
This is caused by a Google account being automatically re-added to the device during backup restore. To prevent this, skip the “restore from backup” step when completing the device setup wizard.
ADB commands return a “device not found” error
The root cause is that USB debugging has not been authorized on the phone. Reconnect the device, then accept the USB debugging authorization prompt that pops up on the phone screen.
FAQs on Xiaomi FRP Bypass
Q1: Will I lose my data during the bypass process?
FRP is tied to account verification, not your files, but since it's triggered after a factory reset, any bypass method assumes the phone has already been wiped. Back up what you can beforehand if the phone isn't already reset.
Q2: What if I bought a second-hand Xiaomi phone that's locked?
Try reaching out to the previous owner to remove their Google account remotely first. If that's not possible, Method 1 is the most practical option, since it doesn't rely on the previous owner's cooperation.
Q3: Can this software also remove a regular screen lock, not just FRP?
Yes iSunshare Android Password Genius also removes PIN, pattern, fingerprint, and passcode locks on a wide range of Android devices, separate from its FRP-specific features.
Conclusion
A Google verification lock on Xiaomi or Redmi phones is rarely permanent and usually quick to fix. Removing your Google account before a reset is the cleanest solution, while ADB commands serve as a free, hands-on fallback. For fast one-click FRP removal that works across MIUI and HyperOS without command-line troubleshooting, iSunshare Android Password Genius is the most reliable choice, purpose-built for Xiaomi/Redmi devices.
Related Articles:
No comments:
Post a Comment